Mixed Reality as a Digital Visualisation Solution for the Head and Neck Tumour Board: Application Creation and Implementation Study.

The preparation and implementation of interdisciplinary oncological case reviews are time-consuming and complex. The variety of clinical and radiological information must be presented in a clear and comprehensible manner. Only if all relevant patient-specific information is demonstrated in a short time frame can well-founded treatment decisions be made on this basis. Mixed reality (MR) technology as a multimodal interactive user interface could enhance understanding in multidisciplinary collaboration by visualising radiological or clinical data. The aim of the work was to develop an MR-based software prototype for a head and neck tumour board (HNTB) to support clinical decision-making. The article describes the development phases and workflows in the planning and creation of a MR-based software prototype that were required to meet the multidisciplinary characteristics of a HNTB.

A New Approach to Virtual Occlusion in Orthognathic Surgery Planning Using Mixed Reality-A Technical Note and Review of the Literature.

Orthognathic surgery plays a vital role in correcting various skeletal discrepancies of the maxillofacial region. Achieving optimal occlusion is a fundamental aspect of orthognathic surgery planning, as it directly influences postoperative outcomes and patient satisfaction. Traditional methods for setting final occlusion involve the use of dental casts which are time-consuming, prone to errors and cannot be easily shared among collaborating specialties. In recent years, advancements in digital technology have introduced innovative approaches, such as virtual occlusion, which may offer enhanced accuracy and efficiency in orthognathic surgery planning. Furthermore, the emergence of mixed reality devices and their 3D visualization capabilities have brought about novel benefits in the medical field, particularly in computer-assisted planning. This paper presents for the first time a prototype tool for setting virtual occlusion during orthognathic surgery planning using mixed reality technology. A complete walkthrough of the workflow is presented including an explanation of the implicit advantages of this novel tool. The new approach to defining virtual occlusion is set into context with other published methods of virtual occlusion setting, discussing advantages and limitations as well as concepts of surgical occlusion for orthognathic surgery.

Osseointegration of titanium implants after surface treatment with ultraviolet light or cold atmospheric plasma in vivo.

PURPOSE: To determine the histological effects of ultraviolet light and cold atmospheric plasma treatment on the osseointegration of titanium implants in vivo. MATERIALS AND METHODS: Six juvenile pigs were divided into three groups of two animals each. A total of 54 titanium implants were placed randomly in the pigs' calvarial bone (nine implants per pig). Of these, 18 implants served as untreated controls. The remaining 36 implants served as the experimental group and were treated with either ultraviolet light or argon plasma for 12 minutes each prior to insertion. Two pigs in each group were kept until 2, 4 and 8 weeks and then sacrificed. Resonance frequency analysis was conducted after implant placement and at the time of sacrifice. Osseointegration was evaluated using microcomputed tomography scans and histomorphometrical analysis. RESULTS: After initial loss, all implants showed a constant increase in implant stability quotient values over time without significant differences between the groups. The bone-implant contact values increased steadily for all implants over 8 weeks of healing. Surface-treated implants showed significantly higher bone-implant contact values compared to untreated implants at each time point. Bone area fraction occupancy values were almost always higher following both treatment methods; however, differences were only significant after 4 and 8 weeks for the cold atmospheric plasma group and after 4 weeks for the ultraviolet light group. CONCLUSIONS: Ultraviolet light and cold atmospheric plasma may improve histomorphometrical osseointegration of titanium implants significantly.

Usage of Object Matching Algorithms Combined with Mixed Reality for Enhanced Decision Making in Orbital Reconstruction-A Technical Note.

This technical note describes the usage of object matching to virtually compare different modes of reconstruction in orbital trauma and display the results to the surgeon and the patient pre-operatively via mixed reality devices for enhanced surgical decision making and immersive patient education. A case of an orbital floor fracture is presented for which surface and volume matching were implemented to compare orbital reconstruction utilizing pre-fabricated titanium meshes versus patient-specific implants. The results could be visualized by mixed reality devices to further enhance surgical decision-making. The data sets were demonstrated to the patient in mixed reality for immersive patient education and enhanced shared decision making. The advantages of the new technologies are discussed in view of the new possibilities of improved patient education and informed consent processes, as well as new ways of teaching medical trainees.

Influence of Renal Impairment on the Success of Reconstruction Using Microvascular Grafts-A Retrospective Study of 251 Free Flaps.

BACKGROUND: In head and neck surgery, reconstruction using microvascular grafts is a successful method for functional and aesthetic restoration. Due to technological advances and medical care, the number of patients with comorbidities and diseases requiring free tissue transfer has increased. To provide adequate treatment to these patients, preoperative identification of potential risk factors is essential. METHODS: In this retrospective study, we investigated the impact of renal insufficiency on reconstruction in 251 microvascular grafts. Perioperative complications, failure rate, and outcomes serve as the basis for this evaluation. RESULTS: Comparing pre- and postoperative values, there was a significant decrease in potassium and creatinine levels and a significant increase in GFR. The electrolyte changes in relation to the complication rate showed that complications were more likely to occur as potassium levels increased. As sodium levels increase, the complication rate decreases. CONCLUSION: A preoperative value indicative of impaired renal function, such as creatinine levels, GFR, or electrolytes, did not prove to be an individual risk factor for the occurrence of graft failure in this patient population. Nevertheless, increased renal parameters are associated with increased incidence of serious complications. Therefore, these should be considered in the indication and preoperative planning.

Advances and Innovations in Ablative Head and Neck Oncologic Surgery Using Mixed Reality Technologies in Personalized Medicine.

The benefit of computer-assisted planning in head and neck ablative and reconstructive surgery has been extensively documented over the last decade. This approach has been proven to offer a more secure surgical procedure. In the treatment of cancer of the head and neck, computer-assisted surgery can be used to visualize and estimate the location and extent of the tumor mass. Nowadays, some software tools even allow the visualization of the structures of interest in a mixed reality environment. However, the precise integration of mixed reality systems into a daily clinical routine is still a challenge. To date, this technology is not yet fully integrated into clinical settings such as the tumor board, surgical planning for head and neck tumors, or medical and surgical education. As a consequence, the handling of these systems is still of an experimental nature, and decision-making based on the presented data is not yet widely used. The aim of this paper is to present a novel, user-friendly 3D planning and mixed reality software and its potential application for ablative and reconstructive head and neck surgery.

Evaluation of the Fitting Accuracy of CAD/CAM-Manufactured Patient-Specific Implants for the Reconstruction of Cranial Defects-A Retrospective Study.

Cranioplasties show overall high complication rates of up to 45.3%. Risk factors potentially associated with the occurrence of postoperative complications are frequently discussed in existing research. The present study examines the positioning of 39 patient-specific implants (PSI) made from polyetheretherketone (PEEK) and retrospectively investigates the relationship between the fitting accuracy and incidence of postoperative complications. To analyze the fitting accuracy of the implants pre- and post-operatively, STL files were created and superimposed in a 3D coordinate system, and the deviations were graphically displayed and evaluated along with the postoperative complications. On average, 95.17% (SD = 9.42) of the measurements between planned and surgically achieved implant position were within the defined tolerance range. In cases with lower accordance, an increased occurrence of complications could not be demonstrated. The overall postoperative complication rate was 64.1%. The fitting of the PEEK-PSI was highly satisfactory. There were predominantly minor deviations of the achieved compared to the planned implant positions; however, estimations were within the defined tolerance range. Despite the overall high accuracy of fitting, a considerable complication rate was found. To optimize the surgical outcome, the focus should instead be directed towards the investigation of other risk factors.

Comparison of the Accuracy and Clinical Parameters of Patient-Specific and Conventionally Bended Plates for Mandibular Reconstruction.

OBJECTIVES: This retrospective study compared two mandibular reconstruction procedures-conventional reconstruction plates (CR) and patient-specific implants (PSI)-and evaluated their accuracy of reconstruction and clinical outcome. METHODS: Overall, 94 patients had undergone mandibular reconstruction with CR (n = 48) and PSI (n = 46). Six detectable and replicable anatomical reference points, identified via computer tomography, were used for defining the mandibular dimensions. The accuracy of reconstruction was assessed using pre- and postoperative differences. RESULTS: In the CR group, the largest difference was at the lateral point of the condyle mandibulae (D2) -1.56 mm (SD = 3.8). In the PSI group, the largest difference between preoperative and postoperative measurement was shown at the processus coronoid (D5) with +1.86 mm (SD = 6.0). Significant differences within the groups in pre- and postoperative measurements were identified at the gonion (D6) [t(56) = -2.217; p = .031 <.05]. In the CR group, the difference was 1.5 (SD = 3.9) and in the PSI group -1.04 (SD = 4.9). CR did not demonstrate a higher risk of plate fractures and post-operative complications compared to PSI. CONCLUSION: For reconstructing mandibular defects, CR and PSI are eligible. In each case, the advantages and disadvantages of these approaches must be assessed. The functional and esthetic outcome of mandibular reconstruction significantly improves with the experience of the surgeon in conducting microvascular grafts and familiarity with computer-assisted surgery. Interoperator variability can be reduced, and training of younger surgeons involved in planning can be reaching better outcomes in the future.

Stromal fibroblasts in colorectal liver metastases originate from resident fibroblasts and generate an inflammatory microenvironment.

Cancer-associated stromal fibroblasts (CAFs) are the main cellular constituents of reactive stroma in primary and metastatic cancer. We analyzed phenotypical characteristics of CAFs from human colorectal liver metastases (CLMs) and their role in inflammation and cancer progression. CAFs displayed a vimentin(+), alpha-smooth-muscle actin(+), and Thy-1(+) phenotype similar to resident portal-located liver fibroblasts (LFs). We demonstrated that CLMs are inflammatory sites showing stromal expression of interleukin-8 (IL-8), a chemokine related to invasion and angiogenesis. In vitro analyses revealed a striking induction of IL-8 expression in CAFs and LFs by tumor necrosis factor-alpha (TNF-alpha). The effect of TNF-alpha on CAFs is inhibited by the nuclear factor-kappaB inhibitor parthenolide. Conditioned medium of CAFs and LFs similarly stimulated the migration of DLD-1, Colo-678, HuH7 carcinoma cells, and human umbilical vein endothelial cells in vitro. Pretreatment of CAFs with TNF-alpha increased the chemotaxis of Colo-678 colon carcinoma cells by conditioned medium of CAFs; however, blockage of IL-8 activity showed no inhibitory effect. In conclusion, these data raise the possibility that the majority of CAFs in CLM originate from resident LFs. TNF-alpha-induced up-regulation of IL-8 via nuclear factor-kappaB in CAFs is an inflammatory pathway, potentially permissive for cancer invasion that may represent a novel therapeutic target.